Atmel

3: Mega2560: reset-related groups

TRAIL: A SysMLv1.6+ model of the Arduino Mega2560Rev3 microcontroller board

Slides in this section

If you want to navigate the entire section including the additional explanatory text click on the title link of the first slide to view the full slide page, then use the next links to move through the slide pages. If you just want to view the slide images only in sequence, click on any slide to view it larger in a viewer, then click again to move through each slide in this tutorial trail section.

IBD: Arduino Mega 2560 reset-related groups overview

Focus BDD: Group_ResetButton.bdd

Focus BDD: Group_RESET

Focus BDD: Group_RESET_EN

Focus BDD: RESET_EN

AVCC is the supply voltage pin for Port F and the A/D Converter. It should be externally connected to VCC, even if the ADC is not used. If the ADC is used, it should be connected to VCC through a low-pass filter.

Source

Datasheet: Atmel ATmega640/V-1280/V-1281/V-2560/V-2561/V

Datasheet: Atmel ATmega640/V-1280/V-1281/V-2560/V-2561/V

ATmega16U2

Keywords

Keywords

Arduino zone

Keywords

Keywords

From https://www.arduino.cc/:

Arduino is an open-source electronics platform based on easy-to-use hardware and software. It's intended for anyone making interactive projects.

Some versions of the amazing Drancel (R,G,B) light synthesis system are driven by Arduino.

JTAG (named after the Joint Test Action Group which codified it) is an industry standard for verifying designs and testing printed circuit boards after manufacture.

JTAG: The connector pins are: 1. TDI (Test Data In); 2. TDO (Test Data Out); 3. TCK (Test Clock); 4. TMS (Test Mode Select); 5. TRST (Test Reset) optional.

Subscribe to Atmel