11.3 Component behavior - Real.Mathematical

The following diagram shows a Block Definition Diagram (BDD) style representation of MagicDraw/Cameo SysPhSLibrary components vs the SysPhS-1.1 spec table 11.3.2.5 Mathematical components:

Click on the image to view it full size

Most are obvious, the following matters are noteworthy:

SysPhS-1.1: p.57: GOTCHA: Table 11.3.2.5 Mathematical components: Mathematical.Subtraction maps to Math.Add (in Modelica) and Sum (in Simulink)

MDSysML/Cameo: SysPhSLibrary: GOTCHA: You must set the additional 'k2' parameter for Modelica to be minus to achieve subtraction

SysPhS-1.1: p.57: Table 11.3.2.5 Mathematical components: Modelica Parameters for the Subtraction row should indicate (k1 and) k2 required to achieve subtraction via Math.Add (or the correct exported values should be explained).

Up next

11.3 Component behavior - Sources and sinks

Notes

[TIP, WARNING] SysPhS-1.1: p.57: GOTCHA: Table 11.3.2.5 Mathematical components: Mathematical.Subtraction maps to Math.Add (in Modelica) and Sum (in Simulink)

[TIP, WARNING] MDSysML/Cameo: SysPhSLibrary: GOTCHA: You must set the additional 'k2' parameter for Modelica to be minus to achieve subtraction

[ISSUE] SysPhS-1.1: p.57: Table 11.3.2.5 Mathematical components: Modelica Parameters for the Subtraction row should indicate (k1 and) k2 required to achieve subtraction via Math.Add (or the correct exported values should be explained).

Snippets (quotes/extracts)

Visit also

SysPhS-1.1

SysPhS zone (SysML Extension for Physical Interaction and Signal Flow Simulation)

Visit also (backlinks)

Related slides (includes other tutorials)

Related slides (backlinks, includes other tutorials)

Flags